Skip navigation and jump to the content

Products

H&K Behälter- und Edelstahltechnik GmbH
The experts for individual tanks and special designs.

Info:

References

Satisfied customers are the best proof for good work. We are very proud of a large number of existing customers that choose us time and again due to our high quality. Here you will find a selection of references from different industrial sectors.

Pressure tank 1,400 l made of Hastelloy 2.4602

Project information

Dimensions: Ø 1,200mm, total height 2,000mm, total capacity 1,400 l. Top and bottom with torospherical head according to DIN 28011, standing upright on four tube feet with built-in forklift receptacles.

Materials:

  1. Parts in contact with the product made of Hastelloy C22 2.4602
  2. Flanges DIN 2576 made of 1.4541, plated with C22
  3. Threaded sleeves DIN 11851 made of socover C22
  4. Feet with forklift receptacles made of 1.4301

Surface treatment:

  1. Inner welding seams ground flush with the sheet surface
  2. Inner surfaces ground up to grain size 240 (Ra < 0,8μ)
  3. Inner and outer surfaces pickled and passivated

Operating data:

  1. The tank is designed for a maximum operating pressure of -0.05 (0.95 bar abs.) up to 6 bars at -17/110 °C.
  2. Acceptance by TÜV Süd according to PED (Pressure Equipment Directive) 97/23/EG, Cat. IV, module G

Info:

References

Satisfied customers are the best proof for good work. We are very proud of a large number of existing customers that choose us time and again due to our high quality. Here you will find a selection of references from different industrial sectors.

Decompression chamber with pre-chamber

Project information

Dimensions: The tiltable raw chamber with internal barrow rack and perforated sheet couch has a diameter of 1,150mm and a total length of 2,215mm. The pre-chamber has a diameter of 1,150mm and a length of 790mm. The two chambers may be connected by means of two flange rings DN 650 with screwed-on intermediate ring each and rotary bayonet ring. Each chamber is equipped with several windows.

Materials:

  1. AlMg 4,5 Mn, AlMgSi 0,5, AlMg 3
  2. 1.4571 for rotary bayonet rings

Surface treatment:

  1. Both chambers completely pickled and passivated

Operating data:

  1. Both chambers are designed for a permissible operational overpressure of 5.5 bars at 50 °C max.
  2. Acceptance by TÜV Süd according to PED (Pressure Equipment Directive) 97/23/EG, Cat. IV, module G

Info:

References

Satisfied customers are the best proof for good work. We are very proud of a large number of existing customers that choose us time and again due to our high quality. Here you will find a selection of references from different industrial sectors.

3-chamber-tank

Project information

Dimensions: Ø 1,000mm, total height 2,500mm, at the bottom and at the top with hemispherical heads. In the interior two built-in and removable aluminium tanks with a capacity of 300 and 500 l, respectively. Upper aluminium tank in spherical shape, lower tank with hemispherical heads and jacket part with a height of 350mm. The internal tanks are placed on fixtures and are accessible from outside through a special nozzle design.

Materials:

  1. AlMg 4,5 Mn, AlMgSi 0,5, AlMg 3
  2. 1.4571 for rotary bayonet rings

Surface treatment:

  1. Inner and outer surfaces completely pickled and passivated

Operating data:

  1. The tank is designed for a permissible operational overpressure of 4 bars at 50 °C for the outer tank and 1.5 bars each for the inner tanks.
  2. Acceptance by TÜV Süd according to PED (Pressure Equipment Directive) 97/23/EG, Cat. IV, module G

Info:

References

Satisfied customers are the best proof for good work. We are very proud of a large number of existing customers that choose us time and again due to our high quality. Here you will find a selection of references from different industrial sectors.

Reactor for 50 bar

Project information

Dimensions: Ø 1,300mm, total height 2,850mm. At the bottom and at the top with ellipsoidal heads according to DIN 28013, standing upright on four tube feet DN 125. At the upper torospherical head with built-in tube coil DN 25 for condensation. Due to the high operating pressure the wall thickness of the tank is 32mm. The total weight is approx. 4 t. 0,37-kW agitator with built-on frequency converter; two heating devices to be screwed on with 5-kW; one drum pump for almost complete emptying of the storage-jar

Materials:

  1. AlMg 4,5 Mn, AlMgSi 0,5, AlMg 3

Surface treatment:

  1. Inner and outer surfaces pickled and passivated

Operating data:

  1. The tank is designed for a permissible operational overpressure of -1/ 50 bars at 250 °C in the interior and -1/ 40 bars at 100 °C in the tube coil
  2. Acceptance by TÜV Süd according to PED (Pressure Equipment Directive) 97/23/EG, Cat. IV, module G

What's Next?

We roused your interest and you need an individual information or an expert advice. Call us now on + 49 78 51 70 89 68 – 0 .
Or contact us via skype on: status

For a request without obligation download our request template here.